We now offer device protection on select devices!
Your cart is currently empty
LED panels 30x120 are our narrowest rectangular LED panels. On this page you will find all 120x30 panels and accessories. Normally LED panels are built into a ceiling system. Don't you have a ceiling system? Then we have other options for you! The first option is to place the panel against the ceiling using a surface mount frame. In addition, you can also hang the panels from the ceiling. You can do this using a suspension kit (steel cables).
Back-lit panels are illuminated from the back of the panel, therefore the panel at the back is 35mm. because the LED chips are attached to the back, the panel is lightweight and has an efficient luminous flux.
Edge-lit Panels are illuminated from the sides of the panel, so the light chips are spread over the entire panel, this makes these panels extra thin, which is 9mm. They are slightly heavier than back-lit panels, though.
Both panels are High Lumen (120 lumens per watt) and last 50,000 hours, are economical in consumption and are optionally dimmable.
The UGR (Unified Glare Rating) value is a value that indicates the degree of unpleasant glare.
The lower the value, the less light pollution a person will experience. Applying the right lighting deserves a lot of attention because it greatly affects mood, productivity and functioning. The light should be bright enough to perform work well, but should not cause glare or dazzle.
Glare can be caused either directly or indirectly. Direct glare can involve a light source shining into your eyes, while indirect glare involves reflection of the light source on a reflective surface. The indirect form is much underestimated because it is not directly noticeable, effects of too high UGR value can be headaches, tingling/fatigued eyes or feeling tired and slightly dizzy.
